Northwest Trade Gun Wilson
Basic kit $1075 $1090 Semi-finished kit $1195 $1210 Assembled-in-the-white $1450 $1465 Finished- full warranty $1650 $1675
Wilson and Northwest locks are both still $145.
All guns listed above are with locks.
Above guns available with either 36 inch or 41 inch barrels. The guns use an interchangeable barrel system, with these choices available: 20, 24 or 28 gauge smoothbore, and .50, .54 or .58 rifled. Charges for second barrel fitting. The Northwest gun is now offered in a 24" " canoe gun" barrel version. Still retains our interchangeable barrel system, too.
Rifling twist rate - 1 in 54 inches.
LOCKS; Our complete line of guns are designed for use with the complete line of locks produced by Caywood Gunmakers, Inc. We advise the use of these high-quality, historically correct locks in all of our guns. They come with a limited lifetime warranty, and are built to flawlessly withstand thousands of shots. Current prices of locks are;
Shipping for locks is $7.
BOTH KITS; feature 98% inletted stock. Barrel and lock 100% inletted. Pre-drilled holes in stock for tang bolt, cross bolts, barrel tenons and ramrod thimbles. Barrel tenons installed and slotted, front sight installed and tang bolt hole pre-drilled and tapped. Lock bolt holes are tapped and touch-hole is drilled and coned. Wood is straight grain maple and prices listed are for smoothbore guns. Wood up-grades are available, call for details. Safety-use manual, blueing or browning, stain and assembly instructions included.
BASIC; kit will retain some cutter marks.
SEMI-FINISHED; kit has the following additional work done: all cutter marks removed, lock panels shaped, comb-line shaped, wrist shaped, tang-carving smoothed and sanded and top of tang area to barrel channel shaped.
ASSEMBLED; guns come fully assembled, with ramrod fitted, and could be shot right out of the box after customer places lock of choice in inlet. Includes; stain, blueing solution or browning solution and finishing instructions.
Special notes: an additional charge of $60 will be assessed for fitting of second barrel on kits or assembled guns. This will include installing barrel tenons, front sight, drilling and tapping tang bolt hole, drilling and coning touch-hole and shaping down tang to match wood. A rear sight can be installed for $20 plus $10 for the sight. If bore sizes are different, a second ramrod will be fitted to gun for $25 including parts. The second barrel fitting for finished gun will be same as above, plus $20 for blueing, which totals $80.
....And the sparks will fly.